|
|
|
|
| Crusher Model |
| |
| Below are the list of diffrent type of crushers available in the market. |
| |
| Bradford Breakers |
| |
- Separate rock and other debris from coal while crushing.
- Heavy duty for primary reductions.
- Accept input sizes as large as 40" (1 m.)
- Capacities up to 500 tph.
- Available in three styles.
|
| Impact Crusher |
| |
The Harison Jaw Crusher manufacturer of quality Impact Crusher in many different models such as Reversible Impactors, Twin Rotor Impactors, Sizers and Granulators. Our cubically shaped Impact Crusher is normally used for Stone on Home Crushing for sand making and Stone on Metal Crushing for Cubical Product.
Reversible Impactor
Our product Reversible Impactor is usually used as secondary crushing. Generally these crushers are used for Lime Stone, Cement clinker, Gypsum and other lightweight aggregates. These crushers are generally recommended for crushing material having excessive moisture contents, due to open bottom system. The crushers are provided with heavy-duty steel fabricated body with adjustable compensate for wear. |
| |
- Capacities up to 500 tons per hour.
- Input sizes as large as 20" (500 mm).
- Usually used as a secondary crusher.
- High reduction ratios.
- Adjustable to compensate for wear.
- Adjustable to vary output gradation.
|
Twin Rotor Impactors
The Harison Jaw Crusher's Twin-Rotor Impactor is ideally designed for crushing sticky or wet materials like clays, shale, and other similar materials to produce size efficiently. It is a particular outstanding crusher for primary, secondary or tailings reduction in brick and tile plants. The Frame can be heated to minimize buildup. |
| |
- Designed for sticky material.
- Frame can be heated to minimize buildup.
|
Sizers
Our product sizers are available for both primary and secondary reduction. Our sizers require comparatively low power. The Sizers unique shearing action minimizes fines productions. |
| |
- Available for both primary or secondary reduction
- Shearing action minimizes fines production
- Output sizes as small as 2" (50-mm)
- Minimum foundation requirements
- Low headroom
- Comparatively low power requirements
|
Granulators
The Harison Jaw Crusher manufactures three different for primary and secondary reduction. The main feature in our granulators is adjustable cage to vary output size. Forged ring hammers are standard on most models. |
| |
- Available in three models for primary and secondary reduction.
- Ring hammers at slow speeds produce minimum fines.
- Adjustable cage to vary output size.
- Typical output sizes are 2" to 1/2" (50 to 12 mm).
- Forged ring hammers are standard on most models.
- Adjustable to compensate for wear.
- Non-plugging cage design.
|
|
| Roll Crushers |
|
| |
|
| Single Roll Crushers |
|
| |
- Primary crusher accepts input sizes as large as 36" (900 mm).
- Available in three models.
- Suitable for compressive strengths as high as 16,000 psi (110 Megapascals).
- Adjustable to vary output size.
- Typical output sizes are 4" to 8" (100 to 200 mm).
- Adjustable to compensate for wear.
- Spring loaded relief mechanism provides tramp iron protection.
|
| Double Roll Crushers |
| |
- Models for stone or coal.
- Adjustable to vary output size.
- Typical output sizes are 2" (50 mm) or less.
- Adjustable to compensate for wear.
- Spring loaded relief mechanism provides tramp iron protection.
- Segmented roll shells are standard on all models.
|
| Clinker Grinders |
| |
- A specialized single roll design.
- Flange to flange size designed to replace other makes.
- Suitable for water impounded hoppers when required.
- Hinged maintenance door permits segment replacement without removing crusher from your system.
|
| Frozen Coal Crackers |
| |
- Chain driven single roll design.
- Designed for under hopper or pile use.
- Reduces frozen lumps to conveyable size.
- Capable of starting under load.
|
|
|
| Hammermills |
|
| |
|
| One Way Models |
| |
- Three models available for both primary and secondary applications.
- Large reduction ratios are possible with most materials.
- Tramp iron traps are provided on all sizes.
- Special non-clog model available for sticky materials.
|
| Reversible Models |
| |
- Typical input sizes are 6" (150 mm) or smaller.
- Forged steel hammers are available on most models.
- Adjustable to vary output size.
- Typical output top sizes are 1-1/2" (38 mm) to 1/8" (3 mm).
- Adjustable to compensate for wear.
- Tramp iron protection on all models.
|
|
|
| Cage Mills |
|
| |
|
- Shaft within shaft design provides easy maintenance, and minimizes floor space required.
- Fine, medium, and coarse cage styles available.
- Flat or round striker plates available to suit your application.
- Single or multi-cage styles.
|
|
|
| Jaw Crusher |
|
| |
|
- Our double toggle design minimizes wear.
- Straight line crushing action.
- Unique spring loaded flywheel eliminates the need to replace toggles for tramp iron protection.
- Enclosed and lubricated drive extends component life.
|
|
|
| Grinding Mills |
|
| |
|
- End peripheral discharge style.
- Produces minimum fines.
- Robust roller and tire supported cylinder.
- Integral drying is available if needed.
|
|
| |
